Gemco's
laboratory blenders provide a multi-capability approach to research
and development and pilot applications. Solids blending, de-lumping,
liquid addition, and agglomerations are easily accomplished in minutes.
For many applications the units can also function as reaction vessels
as well.
Gemco lab blenders are actually scaled down versions of full product
blenders. Each incorporates Gemco's traditional dual trunnion design
frame with full ball bearing support. Each provides the optional
ability to add liquids either with standard gravity feed or with
the revolutionary Airless Liquid Injection System. In short, a Gemco
lab blender is an invaluable additional to any R&D or Pilot Operation.
Support
Enclosures
Full 316 stainless steel support enclosures are standard on every
Gemco lab blender. These protect the motor drive and vessel supports
and help maintain sanitary conditions around the blending area.
The motors are not in the discharge area so potential damage from
material spills is eliminated.
Size
All Gemco lab blenders are 16 quart capacity. This allows a working
capacity of 4-16 quarts. For systems with optional agitators, batches
of less than 50% of capacity may be run with the use of optional
cover insert scoops (available on Double-Cone and Slant-Cone). These
scoops lift the material off the bottom and drop it on the agitator
for effective small batch blends.
Standard
Features:
- 16
quart Nominal Working Capacity
- Acrylic
Plastic or 316 Stainless Steel Vessels
- 316
Stainless Steel Support Enclosures with 2B Polish
- Standard
Designs for Material Densities up to 250 lbs./ft.
Optional Features:
- Cantilever
Agitator Bars
- Exclusive
Seal & Ball Bearing Design
- Cover
Scoops to Process Small Batches with Agitator
- Separate
Hour Meters for Main and Agitator Motors
|
